Commit 09776074 authored by Árni Björnsson's avatar Árni Björnsson
Browse files

Combined rear mount

parent 5ab1d365
Pipeline #307004 passed with stage
in 1 minute and 25 seconds
......@@ -230,8 +230,6 @@ Exported as STLs, here are the files:
| [Rear mount Back](../files/final/RearmountBack.stl) |
| [Fusion360 project file](../files/final/RearMount.f3d) |
TODO: Print and show picture of mount
### Plate mount
Next I designed this piece. It's a fitting piece for the rear and front mounts, requiring a 6mm bolt to adjust the angle and tighten. A 50x10mm rectangular shape is cut into each backplate, along with 4 6mm bolt holes. The pieces then slide through the rect and is secured.
......@@ -241,6 +239,26 @@ Next I designed this piece. It's a fitting piece for the rear and front mounts,
<figcaption>Plate mount</figcaption>
</figure>
TODO: Print and show picture of plate mount
| File |
| --- |
| [Plate mount](../files/final/PlateMount.stl) |
#### Putting it together
After the printing finished, I cut a piece of scrap MDF to create a realistic setup.
<figure markdown>
![Rear mount parts](../images/final/rearmount02.jpg)
<figcaption>Rear mount parts</figcaption>
</figure>
<figure markdown>
![Rear mount together](../images/final/rearmount03.jpg)
<figcaption>Rear mount together</figcaption>
</figure>
<figure markdown>
![Rear mount](../images/final/rearmount04.jpg)
<figcaption>Rear mount</figcaption>
</figure>
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment