Commit d464038d authored by Kencho Wangdi's avatar Kencho Wangdi
Browse files


parent 8c701cae
Pipeline #316968 passed with stage
in 46 seconds
......@@ -123,7 +123,7 @@ aAs i ma going to use FTDI to programme my board I have used the TX and RX pin o
Once I finished the schematic I assigned the footprints and routed according to the schematic. I used Inspect dropdown menu to check any errors in my board.
**Milling of the board using SRM20**
......@@ -144,7 +144,7 @@ Once the board was milled I soldered the components.
After soldering I did a quick test using multimeter and found that everything was fine.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment