Commit a48442a1 authored by Kencho Wangdi's avatar Kencho Wangdi
Browse files

files

parent 45fece52
Pipeline #319580 failed with stage
in 21 minutes and 24 seconds
No preview for this file type
This diff is collapsed.
{
"board": {
"active_layer": 0,
"active_layer_preset": "",
"auto_track_width": true,
"hidden_nets": [],
"high_contrast_mode": 0,
"net_color_mode": 1,
"opacity": {
"pads": 1.0,
"tracks": 1.0,
"vias": 1.0,
"zones": 0.6
},
"ratsnest_display_mode": 0,
"selection_filter": {
"dimensions": true,
"footprints": true,
"graphics": true,
"keepouts": true,
"lockedItems": true,
"otherItems": true,
"pads": true,
"text": true,
"tracks": true,
"vias": true,
"zones": true
},
"visible_items": [
0,
1,
2,
3,
4,
5,
8,
9,
10,
11,
12,
13,
14,
15,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
29,
30,
32,
33,
34,
35,
36
],
"visible_layers": "fffffff_ffffffff",
"zone_display_mode": 0
},
"meta": {
"filename": "inputput week.kicad_prl",
"version": 3
},
"project": {
"files": []
}
}
<?xml version="1.0" standalone="no"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink"
version="1.1"
width="29.700220cm" height="21.000720cm" viewBox="0 0 297002200 210007200">
<title>SVG Picture created as output week-Edge_Cuts.svg date 2022/07/11 13:56:29 </title>
<desc>Picture generated by PCBNEW </desc>
<g style="fill:#000000; fill-opacity:1.000000;stroke:#000000; stroke-opacity:1.000000;
stroke-linecap:round; stroke-linejoin:round;"
transform="translate(0 0) scale(1 1)">
</g>
<g style="fill:#000000; fill-opacity:0.0;
stroke:#000000; stroke-width:0.000000; stroke-opacity:1;
stroke-linecap:round; stroke-linejoin:round;">
</g>
<g style="fill:#000000; fill-opacity:0.0;
stroke:#000000; stroke-width:800000.000000; stroke-opacity:1;
stroke-linecap:round; stroke-linejoin:round;">
<path d="M61000000 84000000
L56500000 84000000
" />
<path d="M117500000 102000000
L115500000 105000000
" />
<path d="M117500000 63000000
L125500000 69500000
" />
<path d="M125500000 91000000
L117500000 102000000
" />
<path d="M56500000 63000000
L66000000 63000000
" />
<path d="M56500000 84000000
L56500000 63000000
" />
<path d="M61000000 98000000
L61000000 84000000
" />
<path d="M66000000 63000000
L117500000 63000000
" />
<path d="M125500000 69500000
L125500000 91000000
" />
<path d="M115500000 105000000
L70500000 105000000
" />
<path d="M70500000 105000000
L61000000 98000000
" />
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
</g>
</svg>
This diff is collapsed.
/*
Blink
Turns an LED on for one second, then off for one second, repeatedly.
Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
the correct LED pin independent of which board is used.
If you want to know what pin the on-board LED is connected to on your Arduino
model, check the Technical Specs of your board at:
https://www.arduino.cc/en/Main/Products
modified 8 May 2014
by Scott Fitzgerald
modified 2 Sep 2016
by Arturo Guadalupi
modified 8 Sep 2016
by Colby Newman
This example code is in the public domain.
https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
*/
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin LED_BUILTIN as an output.
pinMode(12, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(12, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(12, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
/*
* Created by ArduinoGetStarted.com
*
* This example code is in the public domain
*
* Tutorial page: https://arduinogetstarted.com/tutorials/arduino-controls-pump
*/
// constants won't change
const int RELAY_PIN = 13; // the Arduino pin, which connects to the IN pin of relay
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin A5 as an output.
pinMode(RELAY_PIN, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(RELAY_PIN, HIGH); // turn on pump 5 seconds
delay(5000);
digitalWrite(RELAY_PIN, LOW); // turn off pump 5 seconds
delay(5000);
}
<?xml version="1.0" standalone="no"?>
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg
xmlns:svg="http://www.w3.org/2000/svg"
xmlns="http://www.w3.org/2000/svg"
xmlns:xlink="http://www.w3.org/1999/xlink"
version="1.1"
width="29.700220cm" height="21.000720cm" viewBox="0 0 297002200 210007200">
<title>SVG Picture created as final project-Edge_Cuts.svg date 2022/07/11 15:16:47 </title>
<desc>Picture generated by PCBNEW </desc>
<g style="fill:#000000; fill-opacity:1.000000;stroke:#000000; stroke-opacity:1.000000;
stroke-linecap:round; stroke-linejoin:round;"
transform="translate(0 0) scale(1 1)">
</g>
<g style="fill:#000000; fill-opacity:0.0;
stroke:#000000; stroke-width:0.000000; stroke-opacity:1;
stroke-linecap:round; stroke-linejoin:round;">
</g>
<g style="fill:#000000; fill-opacity:0.0;
stroke:#000000; stroke-width:800000.000000; stroke-opacity:1;
stroke-linecap:round; stroke-linejoin:round;">
<path d="M59500000 48000000
L65500000 48000000
" />
<path d="M129000000 42500000
L139500000 50000000
" />
<path d="M107500000 75000000
L107500000 74000000
" />
<path d="M83000000 73500000
L98500000 73500000
" />
<path d="M113500000 33000000
L84500000 33000000
" />
<path d="M129000000 42500000
L129000000 29500000
" />
<path d="M129000000 27500000
L113500000 27500000
" />
<path d="M60000000 35000000
L58000000 37000000
" />
<path d="M58000000 37000000
L58000000 45500000
" />
<path d="M65500000 55000000
L65500000 71000000
" />
<path d="M107500000 74000000
L118000000 74000000
" />
<path d="M73000000 71000000
L80500000 71000000
" />
<path d="M118000000 74000000
L119500000 75500000
" />
<path d="M83000000 35000000
L60000000 35000000
" />
<path d="M73500000 71000000
L65500000 71000000
" />
<path d="M58000000 45500000
L59000000 47000000
" />
<path d="M113500000 27500000
L113500000 33000000
" />
<path d="M80500000 71000000
L83000000 73500000
" />
<path d="M65500000 48000000
L65500000 49000000
" />
<path d="M107500000 76500000
L107500000 75000000
" />
<path d="M59000000 47000000
L59500000 48000000
" />
<path d="M84500000 33000000
L83000000 35000000
" />
<path d="M139500000 61000000
L139500000 75500000
" />
<path d="M119500000 75500000
L139500000 75500000
" />
<path d="M139500000 56000000
L139500000 61000000
" />
<path d="M102500000 76500000
L102500000 73500000
" />
<path d="M102500000 73500000
L98500000 73500000
" />
<path d="M139500000 50000000
L139500000 53000000
" />
<path d="M65500000 49000000
L65500000 55000000
" />
<path d="M129000000 29500000
L129000000 27500000
" />
<path d="M139500000 53000000
L139500000 56000000
" />
<path d="M102500000 76500000
L107500000 76500000
" />
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
<g >
</g>
</g>
</svg>
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/*
* Created by ArduinoGetStarted.com
*
* This example code is in the public domain
*
* Tutorial page: https://arduinogetstarted.com/tutorials/arduino-oled
*/
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
// declare an SSD1306 display object connected to I2C
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);
void setup() {
Serial.begin(9600);
// initialize OLED display with address 0x3C for 128x64
if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
Serial.println(F("SSD1306 allocation failed"));
while (true);
}
delay(2000); // wait for initializing
oled.clearDisplay(); // clear display
oled.setTextSize(1); // text size
oled.setTextColor(WHITE); // text color
oled.setCursor(0, 10); // position to display
oled.println("Kencho's project-AUTO GROW"); // text to display
oled.display(); // show on OLED
}
void loop() {
}
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment