Commit bfd5034c authored by anithghalley's avatar anithghalley
Browse files

update to feedback

parent 2c54de42
Pipeline #316832 passed with stage
in 51 seconds
......@@ -155,3 +155,4 @@ For the group assignment, we had to test the design rules for your 3D printers.
- [3D designed stl file](../files/3D_printing_and_scanning/entangle_stl.stl)
- [f3d file of the design](../files/3D_printing_and_scanning/entangle_original.f3d)
- [Scanned Files](../files/3D_printing_and_scanning/
......@@ -228,5 +228,5 @@ Using a drill, I extended the holes and made it fitting for the roof to go in. T
- [stl file of the model](../files/computer_controlled_machining/my_shelf.stl)
- [DXF files](../files/computer_controlled_machining/
- [Scanned Files](../files/3D_printing_and_scanning/
- [Cnc Design file](
......@@ -89,4 +89,15 @@ During the one of the week assignment, I fabricated the Brian FabISP, so that I
I will be using the arduino IDE platform to program the hello world board. To upload the program, I added the USBtinyISP to the programmer library.
\ No newline at end of file
### Programming with FabISP.
Select the board, programmer based on the hardware we will be using.
<video width="600" controls>
<source src="../../images/embedded_programming/videos/ISP.mp4" type="video/mp4">
## Files.
......@@ -147,6 +147,8 @@ And the Sensor is working fine.
Next is to connect the Ultrasonic sensor with my board.
The program code used to interface can be found under files. I am able to get the distance out put.
Then I programed the LED to blink based on the input from the ultrasonic sensor.
......@@ -164,20 +166,29 @@ if(distance <= 50)
And Its working.
## Problem during the week.
I printed my first board and assembled all the components but I was only able to control the LED but the blink was not clear. This is my first board.
I took a multimeter and checked the connection and if there is any short circuit, There I found there was some unknow problem from the botton.
Took the soldering rod and tried to maintain a good soldered joints. But it was still the same. Then I desoldered the button and tested, It was working now.
The problem was from the botton.
<video width="600" controls>
<source src="../../images/input/videos/input_test_1.mp4" type="video/mp4">
## Files.
- [Eagle file.](../files/input/
- Test code
- Ultrasonic and LED code
- [Ultrasonic and LED code](../files/input/ultrasonic_test/ultrasonic_test.ino)
- [Trace png](../images/input/input_traces.png)
- [Edge cut png](../images/input/input_edge_cut.png)
\ No newline at end of file
......@@ -51,6 +51,32 @@ A trademark can be any word, phrase, symbol, design, or combination of these thi
A trade secret is typically something not generally known to the public, where reasonable efforts are made to keep it confidential, and confers some type of economic value to the holder by the information not being known by another party.
## Licensing
There are different types of license to protect someones work. Creative commons is a license to allow the creator to share the work.
So I will be explaining about the type of license I chose is [Attribution-NonCommercial 4.0 International](, the picture above also shows the icon of the license.
With this license, that means:
- You are free to:
- Share — copy and redistribute the material in any medium or format.
- Adapt — remix, transform, and build upon the material
- The licensor cannot revoke these freedoms as long as you follow the license terms.
- Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
Click the [link]( to more about the mentioned type and others.
## Video.
I used iMovie to create this presentation video and I have been using this and very much familar with this.
This diff is collapsed.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment