Commit cbcfcd66 authored by Philip Hozier's avatar Philip Hozier
Browse files

wk12 28/4 update #4

parent 1e6d7105
Pipeline #227043 passed with stages
in 14 seconds
......@@ -262,11 +262,11 @@ I programmed the board to have different 'modes'. With each mode triggering a se
![Individual Assignment](../week12/tracing-problems.jpg "tracing problems")
Make sure any tracks that run parallel at any point, turn at the same angle. Giving the milling machine the best chance possible of getting in between them. Even with the correct design rules the milling bit can fail to get in between these 'meeting of directions';
- Make sure any tracks that run parallel at any point, turn at the same angle. Giving the milling machine the best chance possible of getting in between them. Even with the correct design rules the milling bit can fail to get in between these 'meeting of directions';
Got the Rx and Tx connections the right way around.
- Got the Rx and Tx connections the right way around.
Fixed the cut out lines in Illustrator when converting from a .SVG to a .PNG (at 500 dpi).
- Fixed the cut out lines in Illustrator when converting from a .SVG to a .PNG (at 500 dpi).
**When Board Testing**
......@@ -316,4 +316,4 @@ As for my final project this RGB output will suffice, and now i have some experi
| [Interior](../week12/wk12-RGB-LED-TRACES.png "Interior") | The interior for milling. |
| [ATtiny1614 datasheet](../week12/ATtiny1614-16-17-DataSheet-DS40002204A.pdf "ATtiny1614 datasheet") | ATtiny1614 datasheet. |
| [ATtiny1614 datasheet](../week12/CLV1A-FKB_RGB-LED-datasheet.pdf "CLV1A-FKB RGB LED datasheet") | CLV1A-FKB RGB LED datasheet. |
| [KiCad](../week12/KiCad-RGB-LED.zip "KiCad files" | KiCad files |
\ No newline at end of file
| [KiCad](../week12/KiCad-RGB-LED.zip "KiCad files") | KiCad files |
\ No newline at end of file
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment