Feedback on Your 3D Printing and Scanning Assignment
Hello Mona, Please find my feedback below.
GROUP WORK
-
Two most common materials for printing with the MakerBot are ABS (acrylonitrile butadiene styrene) and PLA (polylactic acid).This sentence is partly wrong. Because, MakerBot Replicator 2 can only print PLA plastic.
-
FormLabs Form 3The provided link goes to FormLabs Form 2
Write a few sentences as a conclusion to indicate what you learned from testing the design rules for your 3D printers.
3D DESIGN
Is the inner ball floating inside the cube? Or, is it attached to it somehow? Again, I could not check your design because the provided files are not downloadable. More comments might come after checking your file out.Does the ball stay inside the cube? Or does it come out? From the pic, it seems that the size of the cube holes is pretty close to the size of the ball inside it.The explanation of why your object cannot be made subtractively is missing.
3D SCANNING
You've got a very nice result for your 3D scanning project :)
TYPO
-
First, I draw a simple sketching of a 30mm by 30 mm square from Sketch > rectangledrew
-
You jist need to click the surface and then drag it up and set it to 30 mm.just
-
Figure 11. The full process of making a 3D design with a moving ball stuck in a cubcube
-
next to the Photos folder for this purposeafter this sentence, there is a dot on the next line.
-
altough there were some extra parts needed to be remove.althoughremoved
-
These week I got familiarized with three different 3D printersDuring this week
FILES
-
I could not download any of your files. Please check and upload again. Also, remember to add the .stl file of your 3D printing project. More comments might come after checking your files.Files: Your 3D scanned files do not show the final product. I can see the extra background (something like figure 28). Do you have any file in which your scanned object looks like figure 30?
NEW COMMENTS
-
I drew an sphere from Create > Sphere and the sphere diameter to 24 mm to be larger than the holes sizes to ensure that it will get stuck inside the cube.I checked the design file that you have uploaded, and the diameter of the sphere is 21 mm in your design. You might have forgotten to upload the latest version of your design?