Applications and implications feedback:
Answering your questions:
- How details of component list is needed? register, capacitor, screws everything?
As much as you can at this stage. Later you will need to add the BOM. For instance, you can add the the electronics components that you know you need to use for sure (e.g. the micro you are using, the drivers ...) you do not need to add ALL the resistor and capacitors that you will use. You can add a section "other electronic components" -> estimated price 5€. The same with the screws: "I will use between 20 and 50 screws+bolts with an estimated cost of 10€"
- How can I calculate the 3D print cost? by m3 but how to get m3 (any easyone?) and what is the cost? You can get the m3 of your pieces when you slice them in Insight. There is a table of prices inside the cupboard next to the Stratasys printer. You can also use this Excel document that you can find in our website.
Comments
What will it do?
OK
Who has done what beforehand?
OK.
What will you design?
OK. Are you designing als the Unity web application?
You say:
ESP32 microcontroller and stepper motor controller provides movement and communication functions.
You are going to desing the board which contains the ESP32 and stepper motor drivers.
What materials and components will be used?
Omni wheels Some of body structure as Tripod
Add the missing "." or ":". What do you mean with Some of body structure as Tripod.
Stepper motor actuator Body height stretching function from 70cm to 120cm
Same comment as before. I think you are missing a "." . Body height stretching is not a material or component to my understanding.
You need to add the stepper motors for teh wheels.
I think you can add more detailed list of components (see my previous answer to your question). Which is the distance measurement sensor that you are planning to use.
Where will they come from?
What about the rest of components you have listed before? You can add the provider that you were planning to use for the DC-DC converter
How much will it cost?
You do not provide an estimation of the cost of your device and the different components.
What parts and systems will be made?
I recommend you to add an sketch or diagram showing the three different parts that you mention. In the "Three Omni-wheel machine base" I would clarify that it is for moving the tripod
What processes will be used?
You are missing electronics fabrication.
What questions need to be answered?
Typo: for the presenatation -> for the presentation.
I think it is Ok just to say this, but I would invite you to make further reflection. You know everything you need? Do you already have a plan for all your electronics and mechanical part? Do you have a clear idea on how to integrate this in Unity before the final project? Are you sure you are going to have time to do everything you are planning or do you have any functionality that you would like to remove.
How will it be evaluated?
That is OK but you can comment also about the precision of movements. How accurate the movement/control should be for succeed?
Do you have any other metrics to measure the success of your project?
From Assessment guide
Have you answered the following questions?
-
what will it do? -
who has done what beforehand? -
What will you design? -
what materials and components will be used? -
where will they come from? -
how much will it cost? -
what parts and systems will be made? -
what processes will be used? -
what questions need to be answered? -
how will it be evaluated?