Commit 9edf049f authored by Grant Fleischer's avatar Grant Fleischer
Browse files

Update docs/assignments/week04.md

parent 40900892
Pipeline #242385 passed with stage
in 41 seconds
......@@ -33,7 +33,7 @@ This is the photo of the completed toolpath of the Programmer I would go on to m
![](../images/candle1.png)
Above is the tool path for the programmer set and homed ready to be milled on my personal CNC. I will solder this board in order to complete this weeks assignment. I used a 1/64 engraving bit in order to engrave the baord and a 1/32 end mill bit to cut the board out.
Above is the tool path for the programmer set and homed ready to be milled on my personal CNC. I will solder this board in order to complete this weeks assignment. I used a .005 engraving bit in order to engrave the baord and a 1/32 end mill bit to cut the board out.
![](../images/trace1.JPG)
......@@ -135,6 +135,8 @@ Below is a video of my blink baord functioning running the basic arduino code. T
<iframe width="560" height="315" src="https://www.youtube.com/embed/CrSIz8gs0c4" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
I did not use the programmer I created while testing my blink board due to the fact that I had not completed it in the order of programmer first and had fallen behind. I was out under covid protocols for this week and once I finished the blink board, I squared away my documentation with it first.
## Failures
While downloading software to mill my board I ran into lots of difficulties due to the lack of compatibility while using a Mac. I tried to download 2 different softwares both with no success. The first software I attempted to install was FlatCam as It was mentioned in the lecture. I attempted to install it by using the terminal function on my laptop but each attempt I was left with an error message reading that there was a newer version of the software available when in fact I was using the newer version. The second software I attempted was CNC.js as one of my classmates had used the software before in the past. I attempted to download the zip file from Git but it would never unzip and it would keep failing to be downloaded.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment