Commit 2c8a1f2e authored by Grant Fleischer's avatar Grant Fleischer
Browse files

Update docs/projects/final-project.md, docs/images/final69.JPG files

parent b8d1bf74
Pipeline #237031 passed with stage
in 50 seconds
......@@ -345,6 +345,12 @@ After hearing Neil's remarks following my oral defense of my project, I decided
![](../images/final41.png)
![](../images/final69.JPG)
Above is an image of my finished board mounts and their success with the mounted board. I am very happy with the way that these turned out and have seent the affect they have on the system integration of my boards and wires in my final project. Not only do the clips neatly fasten the board, they also hold it tight in place to prevent damage. The print took a total of 5 minutes in our lab and I printed it with 100 percent infill for maximum strength. Below is a video of the secured board.
<iframe width="560" height="315" src="https://www.youtube.com/embed/81nnmzSzB_o" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
## Sticker
![](../images/final5.jpg)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment