Commit e746e802 authored by Théo GAUTIER's avatar Théo GAUTIER
Browse files

theomodif

parent 2cf85055
Pipeline #228517 passed with stage
in 43 seconds
......@@ -3,10 +3,11 @@
This week the group assignment was to send a message between two projects. For this we used Elina's board and Theo's board. For the communication voice we decided to use the Tx/Rx voice. We were then able to send messages between the two boards. In the rest of this documentation we will show you how to send a message between two SAMD11Cs using Tx/Rx voice.
![](../images/week14/10.jpg)
*Elina took a picture in a same time with her phone*
## Wiring
Concerning the connection, it is quite simple. It is enough to connect the Tx terminal of the SAMD11C of Elina to the Rx pin of the board of Theo. Inversely for the Rx terminal. Then you just need to power the two boards. For that we used the USB port present on our computers and on our boards.
Concerning the connection, it is quite simple. It is enough to connect the Tx terminal of the SAMD11C of Elina to the Rx pin of the board of Theo. Inversely for the Rx terminal. Also connect the GNDs together so that the electrons can flow. Then you just need to power the two boards. For that we used the USB port present on our computers and on our boards.
![](../images/week14/11.jpg)
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment