Commit 2807bfd4 authored by Antonio de Jesús Anaya Hernández's avatar Antonio de Jesús Anaya Hernández
Browse files

wee13, added rfid and lcd tests

parent d27dfbcc
Pipeline #227160 passed with stage
in 42 seconds
......@@ -56,13 +56,13 @@ Here is the motor powered with 5V.
<video controls="true" allowfullscrenn="true" width="35%" muted="muted">
<source src="../../images/week13/vid1.mp4" type="video/mp4">
</video>
</video>
I tested also with a low woltage, at 1V, and it works also but the motor spins slower.
<video controls="true" allowfullscrenn="true" width="35%" muted="muted">
<source src="../../images/week13/vid2.mp4" type="video/mp4">
</video>
</video>
### 6V motor and H bridge with Arduino
......@@ -78,7 +78,7 @@ And because this motor is a 6V motor, I powered the H-bridge with 6V.
<video controls="true" allowfullscrenn="true" width="35%" muted="muted">
<source src="../../images/week13/vid.mp4" type="video/mp4">
</video>
</video>
As a reminder, here is my code, using platform.io with VSCode:
......@@ -137,6 +137,27 @@ void loop() {
digitalWrite(in1, LOW);
digitalWrite(in2, LOW);
}
}
}
}
```
### LCD Display
I've tested the LCD display on 5 Volts with my circuit and I was able to observe the changes in the current consumption with LCD LED blinking.
<video controls="true" allowfullscrenn="true" width="100%" muted="muted">
<source src="../../images/week13/lcd_01.mp4" type="video/mp4">
</video>
### RFID reader
The RFID was tested with and without the antenna at 5 and 9 Volts.
![](../images/week13/rfid_00.jpg)
![](../images/week13/rfid_01.jpg)
![](../images/week13/rfid_02.jpg)
![](../images/week13/rfid_03.jpg)
![](../images/week13/rfid_04.jpg)
![](../images/week13/rfid_05.jpg)
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment