Evaluation of Your Assignment for 3D Printing and Scanning Week
Links which are not working:
SplitMeshmixer
~~Automaker:~~
Explanation of how you prepared your design for 3D printing in the AutoMaker is missing
Group work:
You need to write a few sentences of your reflection on the group work in your page.
Subtractively:
* The explanation of why your object could not be made subtractively is missing!
* I believe that your object can be made subtractively.
In order to pass this assignment you yourself need to 3D design an object that could not be made subtractively.
* So I am afraid that you will not pass this assignment with the current tasks that you have done.
However, it is good that you have added something in line with your final project here.
3D Scanning:
- You need to explain more how you used Qlone. (you can do it simply by adding text explanation for the pictures that you have uploaded)
- Upload a picture from the platform that you prepared for 3D scanning (if you have).
- Provide more reflection about your experience with 3D scanning.
Files:
-As explained before, you have to upload also .stl file for your 3D designed object. .blend is necessary but not enough!
- The file for your scanned object should be uploaded.
- Make sure that you reduce the size of the files that you are uploading. The current files are too large!
FIX THESE:
- Designing and Printing a Subtractive object was straight forward. Although I did not know what Subtractive exactly means … So I had to redo this assignment.
- The Object can be produced subtractively only due to the fact that it is an object with an object e.g., a milling bit would not be able to access certain parts of the design.
- These sentences are wrong. You are designing an object that cannot be made subtractively!
- FYI, you could know the assignment requirement better if you had paid enough attention to the local & global instructions which were clear enough.