Evaluation of Your Assignment for 3D Scanning and Printing Week
3D PRINTING
"cubes inside need to be designed y a 3D software and 3D printed such that to remove the small cubes woul require breaking the container." --> Typo: to be designed by ... would require"I then used the two cubes to created two more cubes" --> Typo: to createYour explanation for 3D modeling is very good :)"To do this I fixed in the sheet on which the printer is done." --> Typo: print"once the sheet was placed I closed the dooor of the printer. " --> doorReflection is missing.Very good documentation for 3D printing :)
3D SCANNING
"detects it an from ther choose what your scan willl be," --> Typo: there ... will"After this my design was repired and the holes were filled" --> Typo: repairedI really like what you did for 3D scanning. The result is very good :) In lots of cases it is not easy to have such a good result with the sense scanner.Reflection is missing.Please make the scanning file smaller size and upload it.Very good documentation for 3D scanning :)
GROUP WORK
The link to the group page is missing.You learning experience from the group work is missing.
-
The link to the group pages opens your own page. -
" it’s suitable for printing and by using an editor tool I also learnt more." --> Typo: Learned -
You file can be up to 500 KB. For compressing .obj file, have you tried the following method?1. Fusion 360 > open .obj file > Switch to the mesh environment > Select Body > Modify > Reduce > Reduce Type:Adaptive, Reduce Target:Density, reduce the density by moving the bar > save as .stl (Reference)