Molding and Casting
Hi,
Your end product seems to be fine, but there is still quite a lot of material missing from the documentation.
In design, show how you did the wall drafting as that is something that you have not done before. Add link to week, where you have explained the basic processes that you used.
reflected -> mirrored
Add to the beginning of Milling that you selected the material as modeling wax from the top right corner of the main view. This sets the preset values for milling this material.
Add at least one sentence before the images, as now it is extremely hard to tell what you did and why.
You are missing the roughing and finishing settings.
“After this, I set the origin of the milling machine manually to the front left corner.” Add link to this sentence, to the week where you explain the milling process with SRM-20. Now you don’t even mention about the VPanel setup where you set the machine ready.
The wax -> the wax
Aftersetup -> After setup
Smooth cast 30 -> 305
How did you find your results?
Add the STL file as well
I will recheck this after these changes are done.