Commit c7a294a8 authored by Nancy Wu's avatar Nancy Wu
Browse files

18

parent a219a46d
Pipeline #199197 passed with stage
in 16 seconds
......@@ -91,7 +91,8 @@
<section id="three">
<div class="container">
<h3>1. Characterize Laser</h3>
<p>Pancheng in our group document the group assigment. But when I try to use laser cut in Tongji Fablab, there is a new laser cutter. So I test it again and document the process below:</p>
<p>Pancheng in our group document the <a href="http://fabacademy.org/2020/labs/oshanghai/students/pan-cheng/assignments/week04/">group assignment. </a>
But when I try to use laser cut in Tongji Fablab, there is a new laser cutter. So I test it again and document the process below:</p>
<ol>
<li>Material:
I am using 4mm plywood for this week’s test. First we use calipers to check the thickness.
......
......@@ -82,6 +82,12 @@
<section id="three">
<div class="container">
<h3>Group assignment:</h3>
<p>Shayas did <a href="http://fabacademy.org/2020/labs/oshanghai/students/shreyas-tiwari/New%20folder/electronicsproduction.html"> the group assignment link.</a> </p>
<h3>PCB fabrication: </h3>
<p>Etching is traditionally the process of using strong acid or mordant to cut into the unprotected parts of a metal surface to create a design in intaglio (incised) in the metal.[</p>
<p>Lithography is a method of printing originally based on the immiscibility of oil and water.</p>
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment