Week 6 : Electronic Design
WEEK 6: ELECTRONICS DESIGN
INSTRUCTIONS:
- Each checkbox mark an item you must document in your webpage.
- When you considered this item accomplished, check as marked, and write a new comment in the issue.
- Then instructor will review, and leave comment about things that must be changed. The items can be unckecked if considered not complete.
ASSIGNMENT
Group assignment
-
Use the test equipment in your lab to observe the operation of a microcontroller circuit board (in minimum, check operating voltage on the board with multimeter or voltmeter and use oscilloscope to check noise of operating voltage and interpret a data signal) document your work (in a group or individually)
Individual assignment
-
Redraw one of the echo hello-world boards or something equivalent, add (at least) a button and LED (with current-limiting resistor) or equivalent input and output, check the design rules, make it, test it.
HAVE YOU...
-
Llinked to the group assignment page -
Documented what you have learned in electronics design -
Explained problems and how you fixed them, if you make a board and it doesn't work; fix the board (with jumper wires etc) until it does work. -
Included original design files (Eagle, KiCad, - whatever) -
Included a ‘hero shot’ of your board -
Loaded a program and tested if your board works
You can see the Assesment Website here: Electronic Design