From c0f49a6c52cced4993e9b82c9bca8c4a01dd37c7 Mon Sep 17 00:00:00 2001 From: Mitalee Parikh <mitalee.parikh@students.iaac.net> Date: Sat, 18 Sep 2021 09:32:05 +0400 Subject: [PATCH] ed update --- docs/Electronics Design.md | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/docs/Electronics Design.md b/docs/Electronics Design.md index a85d6d9..3131707 100644 --- a/docs/Electronics Design.md +++ b/docs/Electronics Design.md @@ -1,17 +1,16 @@ -Electronics design -================== - -This week is about learning to design a PCB according to a particular microcontroller using its pinout/data sheet by modifying an existing hello echo board. +#Electronics design +--- +This week is about learning how to design a PCB. #### Designing -I chose a hello.echo board based on ATtiny44 as it has the most available documentation. I don't understand completely which microcontroller to chose for what functions. So, I went with this one. +I chose a hello.echo board based on ATtiny44 as it has the most available documentation. -Here is what the actual board looks like +Here is what the actual board looks like - + -To add an LED and a switch, I started by making a list of the components required: +To add an LED and a switch, I started by making a list of the components required: Components list: 1x ATtiny44 microcontroller @@ -35,13 +34,13 @@ Pinout for Attiny44 #### Creating the schematic -I used [KiCad 5.1.6](https://kicad-pcb.org/) to design my PCB. KiCad is an open source software suite for Electronic Design Automation (EDA). The programs handle Schematic Capture, and PCB Layout with Gerber output (this is what you send to a manufacturere). I started by creating a new project and opened the .sch file in Eeschema. +I used [KiCad 5.1.6](https://kicad-pcb.org/) to design my PCB. KiCad is an open source software suite for Electronic Design Automation (EDA). The program helps create a Schematic in sub-application called Eeschema, and then design the PCB Layout with Gerber output (this is what you send to a manufacturere) in the sub-application called PCBnew. #### Update libraries -First step was to import all of the symbol and footprint libraries adapted for SMD components. These libraries can be found [here.](http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/site/local/#material/extras/week06/assets/kicad_libraries.zip) +First step was to import all of the symbol and footprint libraries adapted for SMD components. These libraries can be found [here.](http://academany.fabcloud.io/fabacademy/2020/labs/barcelona/site/local/#material/extras/week06/assets/kicad_libraries.zip) - + #### Designing schematic -- GitLab