Commit 2811061f by Greta VAN VINCKENROY

Update PLA data and UP!settings.png

parent 247f40ad
Pipeline #70091 passed with stages
in 19 seconds
......@@ -25,11 +25,11 @@
### Print Settings
We made this 2 configuration with the printer
We made these 2 configurations with the printer
![](../images/week06/torturetest.jpg)
* 0.20 with PLA wit no support and no brim, infill 20%
* 0.15 with PLA with no support and no brim, infill 20%
* 0.20 with Filament-PLA-silver (1.75mm, 200-220°C) with no support and no brim, infill 20%
* 0.15 with Filament-PLA-silver (1.75mm, 200-220°C) with no support and no brim, infill 20%
......@@ -59,7 +59,7 @@ The difference between both parts is however very difficult to see. The main clu
![](../images/week06/up_settings.png)
* 0.20 with PLA wit no support and no brim, infill 20%
* 0.20 with Unic-PLA-Red (1.75mm, 180-210°C) with no support and no brim, infill 20%
### Result
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment