Networking week 14
This is Week 14 (Applications and implications is week 13)
Describe How to install an APK from your Android device https://www.androidpit.com/android-for-beginners-what-is-an-apk-file
Edit the image of the Bluetooth module HC-06 and HC-05 are different. HC-05 Bluetooth module provides switching mode between master and slave mode which means that the module can either be slave to respond connection initiation or master to initiate peer-to-peer connection. Our HC-06 Bluetooth module can only be in slave mode and needs a master node (e.g. smart phone or Bluetooth enabled PC) to initiate connection.
You should use different terminology when describing how you have connected the module.
ATTiny pins-----> Bluetooth module pins RXbus ———-> TX TXbus ———-> RX 5V ———-> VCC GND ———-> GND Otherwise it may seem that you have done it without addressing possibility.
You have not done FTDI cable. You have done FRC cable (flat ribbon cable). You have used FTDI cable to provide VCC to all the boards and Bluetooth module.
Second figure of app used to control is broken. If duplicate, delete.
You should describe how to configure the Android app.
Reference your output week for the stepper motor controller.