Feedback_Computer-Controlled Cutting_Week 4
- Group Work
-
characterized your lasercutter's focus, power, speed, rate, kerf, and joint clearance - Parametric press-fit construction kit
-
Explained how you parametrically designed your files, accounting for the lasercutter kerf. -
Shown how you made your press-fit kit. -
Included your design files and photos of your finished project - Vinyl Cutting
-
Cut something on the vinylcutter. -
Explained how you drew your files for vinylcutting. -
Shown how you made your vinyl project. -
Included your design files and photos of your finished project.
Please fix the following issues:
- You need to describe what kerf is.
- You need to describe how you used the laser cutter? (Focus, Jog, origin setting, Job selection and etc.)
- Raster mode which controls the engraving, we noticed that image colour is also influencing the engraving. --> How?
- You need to provide more reflection on your experience of trying out different settings for power, speed and frequency.
- You need to do the parametric design of an object by yourself and laser cut the same design.
- You need to replace most of the images that you have uploaded. Unfortunately they are not readable.
- You need to explain the process of vinyl cutting more precisely. How did you you load vinyl? What adjustments did you have for the machine? What settings did you have for sending the print order?
- For vinyl cutting: your image says select sheet: role, but you have used a piece of sheet in another picture.
- Also explain what happened when you selected the related sheet and pressed enter.
- The detailed flow chart for operating the laser cutting is shown in figure 2 (a). Figure 2 (b) presents the default laser parameter for MDF and Acrylic material board. > There is no a and b sections defined for figure 2. So rephrase it and use terms such as "left side of the figure 2" or "right side of the figure 2". OR modify figure 2.
- Line width is set to 0.02 inch to the design. --> 0.02 mm
- Open the design PDF file for vinyl cutting. --> PDF? But the picture shows that your file is open in Inkscape.
- Explain the procedure of loading and removing material for vinyl cutter.
- You need to include the original design files.
- Consider a section at the end of your documentation for including your files (parametric design (.stl, .pdf, .f3d), design for vinyl cutting (.svg), design for kerf, speed, power, frequency test (.svg, .pdf)).
I will correct your assignment again from the beginning when you fix the current issues. Please keep all the requirements for documenting in mind.
Grammar errors and Typos:
-
Both the assignment has two part --> Both assignments have two parts.
-
the parameter list to varies the design to understand the basic --> to vary
-
We are learned first about Kerf. Factors affecting kerf. --> We first learned about kerf and factors affecting kerf.
-
First, we make a prototype design Inkscape with line width for cutting 0.02 inch. --> I don't understand this sentence, please rephrase it. --> also 0.02 inch or mm?
-
The prototype design contains group members name --> The prototype design contains group members' names
-
6 different rectangular cutting area --> 6 different rectangular cutting areas
-
The total area covered in the design is 10x15 cm2 --> The overall size of the design is 10x15 cm
-
Total time is taken for cutting and engraving the design taken 20 minutes. --> The total time that it took for both cutting and engraving was 20 minutes.
-
So we decided to reduce the time by short the design. --> by minimizing the design elements.
-
The Vernier calliper used for measuring the cut area and cut a piece of material after laser cutting. --> the sentence need to be rephrased. --> Also it is 'caliper'.
-
Figure 1 (a) design prototype, (b) actual design, and below images shows the instrument used for the measurements. --> Figure 1 (a) design prototype, (b) actual design, and below images show the instruments used for the measurements.
-
Jobin, I stopped correcting grammar and typo errors here since there is still a lot, Please double check your text for these issues.