electronics production week 5
Hello Arash, I am sorry I had not time to look through you documentation before. All in all, really nice work and fluent documenting. Still there are some parts that are not present on your documentation. Here is a list of corrections you need to make.
link your group members to their pages.
You need to have the group work on your page as well. So copy-paste it or what ever you think is best.
On .rml creating process, please provide full screenshot of the whole "screen" where all selection are visible. Now you just have a part of it shown. You have explained it well, so just add a picture.
"Move the milling bit close to the surface board using the" ...surface OF THE board... you are missing of the there on this sentence.
" Now loose the milling bit using " loosen instead of loose.
On z-origin setting, note that you need to re-tighten the mill bit after dropping it to the surface.
"Now perss the Cut button to select" typo here.
You need to explain getting the rml file to be milled in more detail i.e. how you do it, what the screens look like etc.
"Fist I picked the SMD" typo here.
"But hopefuly you can find" hopefully
If you have any pictures of the soldering, please add few.
You need to provide some screenshots of setting up the programming environment and doing the actual programming phase. And add links to the places you downloaded the programming environment.