Feedback_3D Scanning and Printing_Week 6
-
Group Work
-
Tested the design rules for your 3D printer(s) -
Documented the design rules for your 3D printer(s) -
Included your design files and ‘hero shot’ photo(s) of the final object(s) -
3D Printing
-
Shown and documented how you designed your object -
Explained why it could not be made subtractively -
Shown and documented how you made your object using 3D printer -
Included your design files and ‘hero shot’ photo(s) of the final object -
3D Scanning
-
Scanned an object -
Documented how you scanned the object -
Included your file(s) and ‘hero shot’ photo(s) -
Reflection
-
Described what you learned by testing the 3D printers (Identified the advantages and limitations of 3D printing) -
Outlined problems that you faced in 3D scanning and how you fixed them (Identified the advantages and limitations of 3D scanning)
Please Clarify the Followings for 3D Printing:
The idea of the new 3D model is rather simple, it is a cube with a circular hole on each side and a ball trapped inside it.Please explain why it cannot be made subtractively?.f3d and .stl files of your 3D design are missing.You need to 1) explain how you continued with insight software after you finished 'Modeler setup'; and 2) how you worked with Fortus after you sent the job.
Please Clarify the Followings for 3D Scanning:
The file for 3D scanning is missing. (.obj and .stl). If .obj file is too big, reduce the size by importing your file to Fusion, switching to the Mesh environment and reducing the density of your object. And document it please.
Group work Documentation is missing.
Typos:
-Removing materials from cube interior to create a hollow cavity with a 3mm wall thickness
Keep either hollow or cavity. Cavity = any hollow place; hollow. Hollow = having a space or cavity inside; not solid; empty: e.g. a hollow sphere.Since in my design, the bal was inside the cube, it could not have been built without using support material.ballin order to increase the constract between thecontrastin both Autodesk ReCap Photo and 3DF Zephyer wash quite straightforward.wasThe process was stuck at 1% for more than an hours,an hour