Feedback_Computer-Controlled Cutting_Week 4
- Group Work
-
characterized your lasercutter's focus, power, speed, rate, kerf, and joint clearance - Parametric press-fit construction kit
-
Explained how you parametrically designed your files, accounting for the lasercutter kerf. -
Shown how you made your press-fit kit. -
Included your design files and photos of your finished project - Vinyl Cutting
-
Cut something on the vinylcutter. -
Explained how you drew your files for vinylcutting. -
Shown how you made your vinyl project. -
Included your design files and photos of your finished project.
Please clarify the following for vinylcutting:
After this step: "Release the lever at the left side to place the vinyl film."; You need to explain about aligning pinch rollers on the grit marks and then raising the loading lever.Here: "Open Printing preferences and select Cutting area > Get from machine"; Explain which parameters you kept from the machine and which you changed manually.Mention how you weeded the cut vinyl.
Please clarify the following for press-fit kit:
You need to explain your parameters in the text (only picture is not enough).
Please clarify the following for laser cutting:
you need to explain how you utilized laser cutter(s) such as safety, focus adjustment, jog, origin setting, job and etc.
Please clarify the following for your group work:
-
your documentation for your group work is missing. -
Please check the copy right of the image that you have included for Laser Cutting Kerf.
-
The link to Alok's page is a wrong one. Please fix it.
Please consider a section at the end of your documentation for including your files (parametric design (.stl, .pdf), design for vinyl cutting (.svg), design for kerf test (.svg, .pdf), design for power, speed and frequency (.svg, .pdf), or any other files that you have with different formats (e.g. your DXF file).
- Please include .pdf files of those objects that you eventually cut them utilizing .pdf.
Typos:
Creating an SVG file for laser cutting:a SVG- Extra parenthesis in the 'File' section of your document.