Commit 59249580 by Brigette O'Neill

Update week08.md

parent 03e58c1e
Pipeline #74314 passed with stages
in 21 seconds
......@@ -2,11 +2,11 @@
## Starting my design.
I first started my design on V-Carve. To me, V-Carve is a lot like CorelDraw, only it has both 2D and 3D modelling. This makes it easier for bigger things to be made.
I first started my design on Corel. To me, V-Carve is a lot like CorelDraw, only it has both 2D and 3D modelling. This makes it easier for bigger things to be made.
## Testing my design
I put my design into Corel and tested it out. I hot glued it just to make sure it was tight enough, but I know i wont really be able to do that for my final, final verision of this chair.
I put my design into the laser and tested it out. I hot glued it just to make sure it was tight enough, but I know i wont really be able to do that for my final, final verision of this chair.
## Problems I faced
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment