Commit 748e1d18 authored by Babken Chugaszyan's avatar Babken Chugaszyan

week11 edited

parent 7f33138e
Pipeline #110137 passed with stages
in 43 seconds
......@@ -217,7 +217,7 @@
Finally type:
<br><code>sudo python term.py /dev/ttyUSB0</code>
<br>In my case I used FabFTDI and in this case you need to change <code>/ttyUSB0</code> to <code>/ttyACM0</code> and baudrate to 4800</p>
<span class="image main"><img src="../images/week11/button.jpg" alt="" /></span>
<span class="image main"><img src="../images/week11/button.jpg" alt="button" /></span>
<h4>Hall sensor board</h4>
<p>Connect your usbtiny (FabISP) to the Hall sensor board's ISP port and your computer's USB port, connect FTDI
cable to the USB of your computer and to the FTDI 6pin on the Hall sensor board
......@@ -230,7 +230,7 @@
Finally type:
<br><code>sudo python hello.mag.45.py /dev/ttyUSB0</code></p>
<br>In my case I used FabFTDI and in this case you need to change <code>/ttyUSB0</code> to <code>/ttyACM0</code></p>
<span class="image main"><img src="../images/week11/magnet.jpg" alt="" /></span>
<span class="image main"><img src="../images/week11/magnet.jpg" alt="magnet" /></span>
<h4>Temperature sensor board</h4>
<p>Connect your usbtiny (FabISP) to the temperature sensor board's ISP port and your computer's USB port,
connect FTDI cable to the USB of your computer and to the FTDI 6pin on the temperature sensor board
......@@ -243,7 +243,7 @@
Finally type:
<br><code>sudo python hello.temp.45.py /dev/ttyUSB0 9600</code> // this is for FTDI cable
<br>In my case I used FabFTDI and in this case you need to change <code>/ttyUSB0</code> to <code>/ttyACM0</code></p>
<span class="image main"><img src="../images/week11/temp.jpg" alt="" /></span>
<span class="image main"><img src="../images/week11/temp.jpg" alt="temp" /></span>
</p>
Useful links
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment