update androtso

parent ef4230ff
Pipeline #87210 passed with stage
in 26 seconds
......@@ -118,6 +118,10 @@
<a title="GIMP"><img class="image center" src="images/week3/gimp.jpg"></a>
Here my raster design.
<a title="My raster design"><img class="image center" src="images/week3/rasterdesign.jpg"></a>
<h3>Desing and files</h3>
In order to create 3D designs, the first step is to draw 2D sketches using simple commands such as lines, polygons, circles, etc. There should only be one main restriction: There should be no open sections in the design, everything must be closed contours.<br>
To be able to visualize a design in other software other than the one used in the creation of the same, it is recommended to use the extension .obj or .stl.<br>
These files can be displayed in several software but as a single piece, some software has the possibility of transforming the imported file into one of the design software.
<h3>3D Model </h3>
As I mentioned before, I have experience with the Inventor software, but I decided to try the antimony, but I use the Windows operating system, so I could not execute it.
The following software that I used was the onshape and I was able to make a small drawing.
......@@ -138,13 +142,14 @@
In order to have more knowledge of software, I use Autodesk Fusion taking into account that all the files will be saved in the cloud and the files should be exported if you want to work on another computer without using your own username and password.
<a title="Fusion software"><img class="image center" src="images/week3/fusion.JPG"></a>
Being of Autodesk, it is very similar to the inventor, only that this software has a smaller work menu, as well as letters of direct access to certain tools such as the letter D for Dimension.
<a title="Sketch"><img class="image center" src="images/week3/sketch.jpg"></a>()
<a title="Sketch"><img class="image center" src="images/week3/sketch.jpg"></a>
To make volume or cut extrusions, we only must place the measurement with positive or negative values to be able to achieve our final design.
<a title="Extrude and cut"><img class="image center" src="images/week3/extrudecut.jpg"></a>
This software is more compact than the Inventor software, it also has the option to create the machining in a milling machine or a lathe, although this tool will not be used at the moment.<br>
Here is an image of the software test.
<a title="Test"><img class="image center" src="images/week3/test.jpg"></a>
</p>
<h2>Download Files</h2>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment