week6 update

parent 14ec3d74
Pipeline #85843 passed with stage
in 14 seconds
......@@ -241,7 +241,7 @@
<br><h3>Conclusions</h3>
<h4>Test 1</h4><br>
For this experiment, we can see that in the Test Up print, some small threads are formed with respect to the other test, this is due to the firmware installed in the printer.
For this experiment, we can see that in the Test Up print, some small threads are formed with respect to the other test, this is due to the firmware installed in the printer and the temperatura of the extruder.
<a title="Comparision"><img class="image center" src="images/week6/comparision.jpg"></a>
For the form of the orientation, the extruder is required to make many travels moves, so it was decided to start doing other tests only with the test down.<br>
<br><h4>Test 2</h4>
......@@ -254,6 +254,11 @@
<a title="Test 3 detail"><img class="image center" src="images/week6/test3detail.jpg"></a><br>
<br>As a final conclusion, we realize that as we make an impression with less infill, the printer is forced to create more support, which makes it difficult to eliminate it once the design finishes printing.
<a title="Eliminate support"><img class="image center" src="images/week6/eliminate.jpg"></a><br>
<br><h4>Eliminate "spider webs"</h4>
Tests were conducted to eliminate these small networks, after many tests in the laboratory, it was found that a temperature at which these networks are eliminated.<br>
<b>The best working temperature is 200ºC</b>, then the image of the result.
<a title="Without spider web"><img class="image center" src="images/week6/nospider.jpg"></a>
<br><h3>Scanning</h3>
In our Laboratory we have the scanner HANDYSCAN 700 OF CREAFORM like the picture:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment