week 6 design

parent 4ab4d226
Pipeline #92545 passed with stage
in 19 seconds
......@@ -34,6 +34,19 @@
<h2>Design</h2>
In this week we have to understand the correct functioning of a 3D printer and the limitations they have.
To accomplish that, it is proposed to design a small piece that is not subtractive to test the printers.<br>
A triangle with the indicated measurements is drawn, on a superior plane a point is drawn and finally we use the loft tool to draw the triangle.
<a title="Piramid"><img class="image center" src="images/week6/piramid.jpg"></a>
Then, draw rectangles 20mm away from the center of coordinates and draw a rectangle to extrude it, as shown in the pictures.
<a title="Lateral"><img class="image center" src="images/week6/lateral.jpg"></a>
Finally, a mirror is made with respect to the central plane to obtain the following
<a title="Mirror"><img class="image center" src="images/week6/mirrorcube.jpg"></a>
The previous steps are repeated to obtain the final cube.
<a title="Final mirror"><img class="image center" src="images/week6/allcube.jpg"></a>
To finish, we draw some rectangles to be able to hold the inner pyramid.
<a title="Inner lateral"><img class="image center" src="images/week6/lateralcube.jpg"></a>
The final result is the following picture.
<a title="My design"><img class="image center" src="images/week6/design.jpg"></a>
<br><h4>Why is not be substractively</h4>
A piece that is not subtractive means that it can be machined by a lathe or a milling machine in a simple way or without additional accessories, besides it must be a single piece without assembling it in parts.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment