Commit b9a5ff74 by Ahmad Ali

modifying week 10 ading the sds

parent cc04b3b7
Pipeline #110590 passed with stage
in 26 seconds
......@@ -687,6 +687,19 @@
<h3>First Aid Measures</h3>
<blockquote>
Referenced from the safety Datasheet
</blockquote>
<blockquote>
<a href="http://siliconesolutions.com/media/pdf/SS-5088SDS.pdf">
Go to-
<font color="blue">
Safety Datasheet
</font>
</a>
</blockquote>
<br>
<strong>Inhalation:</strong> Remove source(s) of contamination and move victim to fresh air. If breathing has stopped, give artificial respiration, then oxygen if needed. Contact physician immediately.
Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.
......@@ -701,7 +714,7 @@
<br>
<strong>Handling and Storage</strong>
Keep container(s) tightly closed and properly labeled. Store in cool, dry, well ventilated place away from heat, direct sunlight, strong oxidizers and any incompatibles. Store in approved containers and protect against physical damage. Keep containers securely sealed when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be carefully resealed to prevent leakage. Empty containers retain residue and may be dangerous. Avoid water contamination.
Keep container(s) tightly closed and properly labeled. Store in cool, dry, well ventilated place away from heat, direct sunlight, strong oxidizers and any incompatibles. Store in approved containers and protect against physical damage. Keep containers securely sealed when not in use.Containers that have been opened must be carefully resealed to prevent leakage. Empty containers retain residue and may be dangerous. Avoid water contamination.
<br>
<br>
......@@ -709,7 +722,7 @@
<strong>Hand Protection:</strong> Wear any liquid-tight gloves such as butyl rubber, neoprene or PVC.
<br>
<strong>Eye Protection:</strong> Safety glasses with side shields per OSHA eye- and face-protection regulations 29 CFR 1910.133 and Contact lenses are not eye protective devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
<strong>Eye Protection:</strong> Safety glasses with side shields eye- and face-protection regulations 29 CFR 1910.133 and Contact lenses are not eye protective devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
<br>
<strong>Other Protective Clothing/Equipment:</strong> Additional protective clothing or equipment is not normally required. Provide eye bath and safety shower.
<br>
......@@ -724,6 +737,15 @@
<h2>Casting Resin</h2>
<br>
<h3>Haksons Ultra Clear Grade 1 Epoxy Resin And Hardener</h3>
<blockquote>
Go to the -
<a href="https://www.easycomposites.co.uk/downloads/MSDS/EC-MSDS-Carbon-Fibre-Laminating-Epoxy-and-Hardener.pdf">
<font color="blue">
Safety Datasheet
</font>
</a>
</blockquote>
<div class="row">
......@@ -863,39 +885,20 @@
<h3>Issues Faced</h3>
As you can see the output is not very satisfying to me as the milling was done 3mm endmill and my features include
As you can see the output is not very satisfying to me as the milling was done using 3mm endmill and my features include
<br>
intricate features that would be dne If I would have used 1mm endmill then my features could have come out better.
intricate exploded texts that would have been casted If I would have used 1mm endmill, then my features could have come out better.
<br>
But anyhow there was a lot of learning through the week and as I design a mold around the stock and tooling I
milled it (rough cut + (three-axis finish cut). Although the finishng was not good as the tool selected was not apt.
milled it (rough cut + (three-axis finish cut). Although the finishng was not good as the <strong>tool selected was not apt.</strong>
<br>
I moved on the next week as I was way behind for the next weeks assignment, I hope to make this coreection once lab has
procured 1mm end-mill.
I moved on the next week as I was way behind for the next weeks assignment, I hope to make this correction with 1mm bit(Once I have it) or may be i'll try the v-bit(The one in LAB from which we make the circuits)
</font>
</p>
</p>
</div>
</div>
</div>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment