Commit 49f63c53 by Ahmad Ali

week8 editing

parent 89132db2
Pipeline #110559 passed with stage
in 35 seconds
......@@ -1206,6 +1206,14 @@
<br>
<img src="img/t3.PNG" width="100%">
<br>
<blockquote>
Here in the image I gave the wrong cut depth i.e 14mm it can be manually adjusted when I maesured the wood it was 19mm so i did all the above procedures with 19mm cut depth earlier I thought the wood piece to be 16mm plywood but it was of 19mm thickness.
</blockquote>
<br>
<blockquote>
<strong>Important-</strong>If you give more cut depth than the material thickness while generating the toolpath
the tool can actually go beyond the material and affect the bed of cnc which should be avoided.
</blockquote>
<br>
<strong>Start Depth (D)-</strong>
<br>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment