Commit 12e88f65 authored by wendy's avatar wendy
Browse files

syntax corrections

parent 25b2ba8a
Pipeline #16238 passed with stage
in 4 minutes and 21 seconds
# Computer-Controlled Machining
*group project
* group project
test runout, alignment, speeds, feeds, and toolpaths for your machine
*individual project
* individual project
Make something [big](http://blog.ted.com/2008/07/15/digitally_fabbe/) (on a CNC machine).
......
# Electronics Design
*group project
* group project
Use the test equipment in your lab to observe the operation of a microcontroller circuit board
*individual project
* individual project
Redraw the echo hello-world board, add (at least) a button and LED (with current-limiting resistor), check the design rules, make it, test it.
......
......@@ -2,11 +2,11 @@
> The second half of the Fab Academy programme is designed to build on the previous weeks. You will be synthesising information and implementing skills that you were introduced to in the first half of the programme and encouraged to integrate these into your final project proposal.
*group project
* group project
measure the analog levels and digital signals in an input device
*individual project
* individual project
Measure something: add a sensor to a microcontroller board that you have designed and read it.
......
# Output Devices
*group project:
* group project:
measure the power consumption of an output device
*individual project
* individual project
Add an output device to a microcontroller board you've designed and program it to do something
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment