diff --git a/docs/group_assignments/group2/assets/assignment3/laser.jpg b/docs/group_assignments/group2/assets/assignment3/laser.jpg new file mode 100644 index 0000000000000000000000000000000000000000..b4a92bf2f93549a87c89ec0c4b99805ce9ba8998 Binary files /dev/null and b/docs/group_assignments/group2/assets/assignment3/laser.jpg differ diff --git a/docs/group_assignments/group2/assets/assignment3/lasersettings1.jpg b/docs/group_assignments/group2/assets/assignment3/lasersettings1.jpg new file mode 100644 index 0000000000000000000000000000000000000000..f1e4f656e81fe77e791e672bdb19e6cab2ee584e Binary files /dev/null and b/docs/group_assignments/group2/assets/assignment3/lasersettings1.jpg differ diff --git a/docs/group_assignments/group2/assets/assignment3/lasersettings2.jpg b/docs/group_assignments/group2/assets/assignment3/lasersettings2.jpg new file mode 100644 index 0000000000000000000000000000000000000000..ab4a35a182a366d71cc4c437b9675ad739d36e16 Binary files /dev/null and b/docs/group_assignments/group2/assets/assignment3/lasersettings2.jpg differ diff --git a/docs/group_assignments/group2/assignment3.md b/docs/group_assignments/group2/assignment3.md index 1de923766a393366e6e47b65a4123f3c77e8f1ab..a9db57232806dd5cf88099b2a51a8cc68495a2a5 100644 --- a/docs/group_assignments/group2/assignment3.md +++ b/docs/group_assignments/group2/assignment3.md @@ -50,6 +50,14 @@ Schematic figure As shown in the schematic figure, when the focus is above the laser need to burn more material, the energy is deposited to larger volume. This is probably the reason that the 4mm above did not cut. +The laser cutter is 75 watt Epilog laser fusion + + +The settings for the cutter could be loaded from the menu + + +The settings for the cut and engrave 3mm HDF material are shown below + ## Testing the effect of laser cutting speed and power